Tim Osswald

Polymers Professor - University of Wisconsin

Research Expertise

Polymer Engineering
Advanced Manufacturing
Composites
Additive Manufacturing
Materials Chemistry
Polymers and Plastics
Mechanics of Materials
Condensed Matter Physics
Industrial and Manufacturing Engineering
Biomedical Engineering
Ceramics and Composites
Neurology (clinical)
Radiology, Nuclear Medicine and imaging
Environmental Engineering
Metals and Alloys
Biomaterials
Mechanical Engineering
Surfaces, Coatings and Films
Surfaces and Interfaces
Applied Mathematics
Organic Chemistry
Computer Science Applications
Molecular Biology
Biochemistry
Biotechnology
Civil and Structural Engineering
Pollution
Environmental Chemistry
Computational Mathematics
Analysis
Management Science and Operations Research
Safety, Risk, Reliability and Quality
Artificial Intelligence
Electrical and Electronic Engineering
Hardware and Architecture
Human-Computer Interaction
Signal Processing
Control and Systems Engineering
Management, Monitoring, Policy and Law
Waste Management and Disposal
Fluid Flow and Transfer Processes
Process Chemistry and Technology
Instrumentation
Computational Mechanics
Strategy and Management

About

T. Osswald is Hoeganaes Professor of Materials at the University of Wisconsin-Madison, where he has been a faculty member since 1989. Osswald received the PhD in Mechanical Engineering from the University of Illinois at Urbana-Champaign in 1987, the MS in Mechanical Engineering from the South Dakota School of Mines and Technology in 1982, and the BS in Mechanical Engineering from the South Dakota School of Mines and Technology in 1981. Before joining the UW-Madison faculty, Osswald was a Humboldt Fellow at the Rheinisch Westfalische Technische Hochschule Aachen. Osswald’s research interests are in the areas of processing-structure-property relationships for metals and composites, with a focus on powder metallurgy and metal injection molding. His research has been supported by the National Science Foundation, the Department of Energy, the US Army Research Office, and industry. Osswald is a Fellow of ASM International and the American Academy of Mechanics, and he has received the Extrusion Division Award, the Powder Metallurgy Division Award, and the Distinguished Teaching Award from TMS.

Publications

Material Science of Polymers for Engineers

Materials Science of Polymers for Engineers / Sep 06, 2012

Osswald, T. A., & Menges, G. (2012). Material Science of Polymers for Engineers. Materials Science of Polymers for Engineers, I–XIX. https://doi.org/10.3139/9781569905241.fm

Advanced Injection Molding Technologies

Advanced Injection Molding Technologies / May 06, 2019

Chen, S.-C., & Turng, L.-S. (Eds.). (2019). Advanced Injection Molding Technologies. Advanced Injection Molding Technologies, I–XV. https://doi.org/10.3139/9781569906040.fm

Polymer Processing

Polymer Processing / Apr 24, 2006

Osswald, T. A., & Hernández-Ortiz, J. P. (2006). Polymer Processing. Polymer Processing, i–xxvii. https://doi.org/10.3139/9783446412866.fm

Evaluation of various fire retardants for use in wood flour–polyethylene composites

Polymer Degradation and Stability / Sep 01, 2010

Stark, N. M., White, R. H., Mueller, S. A., & Osswald, T. A. (2010). Evaluation of various fire retardants for use in wood flour–polyethylene composites. Polymer Degradation and Stability, 95(9), 1903–1910. https://doi.org/10.1016/j.polymdegradstab.2010.04.014

Polymer Rheology

Polymer Rheology / Nov 06, 2014

Osswald, T., & Rudolph, N. (2014). Polymer Rheology. Polymer Rheology, I–XI. https://doi.org/10.3139/9781569905234.fm

International Plastics Handbook

International Plastics Handbook / Jun 01, 2006

Osswald, T. A., Baur, E., Brinkmann, S., Oberbach, K., & Schmachtenberg, E. (2006). International Plastics Handbook. International Plastics Handbook, i–xvii. https://doi.org/10.3139/9783446407923.fm

Saechtling Kunststoff Taschenbuch

Saechtling Kunststoff Taschenbuch / Oct 01, 2013

Baur, Brinkmann, Osswald, Rudolph, & Schmachtenberg. (2013). Saechtling Kunststoff Taschenbuch. Saechtling Kunststoff Taschenbuch, I–XXIV. https://doi.org/10.3139/9783446437296.fm

Understanding Polymer Processing

Understanding Polymer Processing / Oct 09, 2017

Osswald, T. A. (2017). Understanding Polymer Processing. Understanding Polymer Processing, I–XVI. https://doi.org/10.3139/9781569906484.fm

Fused filament fabrication melting model

Additive Manufacturing / Aug 01, 2018

Osswald, T. A., Puentes, J., & Kattinger, J. (2018). Fused filament fabrication melting model. Additive Manufacturing, 22, 51–59. https://doi.org/10.1016/j.addma.2018.04.030

Modeling the vulcanization reaction of silicone rubber

Polymer Engineering & Science / Jan 01, 2007

Lopez, L. M., Cosgrove, A. B., Hernandez-Ortiz, J. P., & Osswald, T. A. (2007). Modeling the vulcanization reaction of silicone rubber. Polymer Engineering & Science, 47(5), 675–683. https://doi.org/10.1002/pen.20698

Compression Mold Filling Simulation for Non-Planar Parts

International Polymer Processing / May 01, 1990

Osswald, T. A., & Tucker, C. L. (1990). Compression Mold Filling Simulation for Non-Planar Parts. International Polymer Processing, 5(2), 79–87. https://doi.org/10.3139/217.900079

A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites

Composites Part A: Applied Science and Manufacturing / Nov 01, 2016

Ropers, S., Kardos, M., & Osswald, T. A. (2016). A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites. Composites Part A: Applied Science and Manufacturing, 90, 22–32. https://doi.org/10.1016/j.compositesa.2016.06.016

Characterization of CSF Hydrodynamics in the Presence and Absence of Tonsillar Ectopia by Means of Computational Flow Analysis

American Journal of Neuroradiology / Mar 19, 2009

Roldan, A., Wieben, O., Haughton, V., Osswald, T., & Chesler, N. (2009). Characterization of CSF Hydrodynamics in the Presence and Absence of Tonsillar Ectopia by Means of Computational Flow Analysis. American Journal of Neuroradiology, 30(5), 941–946. https://doi.org/10.3174/ajnr.a1489

A boundary element simulation of compression mold filling

Polymer Engineering and Science / Apr 01, 1988

Osswald, T. A., & Tucker, C. L. (1988). A boundary element simulation of compression mold filling. Polymer Engineering and Science, 28(7), 413–420. https://doi.org/10.1002/pen.760280703

Viscosity of Soy Protein Plastics Determined by Screw-Driven Capillary Rheometry

Journal of Polymers and the Environment / May 28, 2008

Ralston, B. E., & Osswald, T. A. (2008). Viscosity of Soy Protein Plastics Determined by Screw-Driven Capillary Rheometry. Journal of Polymers and the Environment, 16(3), 169–176. https://doi.org/10.1007/s10924-008-0098-3

Design of Dispersive Mixing Devices

International Polymer Processing / Mar 01, 1999

Rauwendaal, C., Osswald, T., Gramann, P., & Davis, B. (1999). Design of Dispersive Mixing Devices. International Polymer Processing, 14(1), 28–34. https://doi.org/10.3139/217.1524

Nozzle clogging factors during fused filament fabrication of spherical particle filled polymers

Additive Manufacturing / Oct 01, 2018

Beran, T., Mulholland, T., Henning, F., Rudolph, N., & Osswald, T. A. (2018). Nozzle clogging factors during fused filament fabrication of spherical particle filled polymers. Additive Manufacturing, 23, 206–214. https://doi.org/10.1016/j.addma.2018.08.009

A numerical model of the viscosity of an epoxy prepreg resin system

Polymer Composites / Oct 01, 1999

Theriault, R. P., Osswald, T. A., & Castro, J. M. (1999). A numerical model of the viscosity of an epoxy prepreg resin system. Polymer Composites, 20(5), 628–633. https://doi.org/10.1002/pc.10385

Effects of raster angle on the mechanical properties of PLA and Al/PLA composite part produced by fused deposition modeling

Polymers for Advanced Technologies / May 22, 2019

Zhang, X., Chen, L., Mulholland, T., & Osswald, T. A. (2019). Effects of raster angle on the mechanical properties of PLA and Al/PLA composite part produced by fused deposition modeling. Polymers for Advanced Technologies, 30(8), 2122–2135. Portico. https://doi.org/10.1002/pat.4645

Incorporation of Mg particles into PDLLA regulates mesenchymal stem cell and macrophage responses

Journal of Biomedical Materials Research Part A / Dec 29, 2015

Cifuentes, S. C., Bensiamar, F., Gallardo-Moreno, A. M., Osswald, T. A., González-Carrasco, J. L., Benavente, R., González-Martín, M. L., García-Rey, E., Vilaboa, N., & Saldaña, L. (2015). Incorporation of Mg particles into PDLLA regulates mesenchymal stem cell and macrophage responses. Journal of Biomedical Materials Research Part A, 104(4), 866–878. Portico. https://doi.org/10.1002/jbm.a.35625

Prediction of Shrinkage and Warpage of Fiber Reinforced Thermoset Composite Parts

Journal of Reinforced Plastics and Composites / Aug 01, 1994

Tseng, S.-C., & Osswald, T. A. (1994). Prediction of Shrinkage and Warpage of Fiber Reinforced Thermoset Composite Parts. Journal of Reinforced Plastics and Composites, 13(8), 698–721. https://doi.org/10.1177/073168449401300803

On the use of computational multi-body dynamics analysis in SLS-based 3D printing

Additive Manufacturing / Oct 01, 2016

Mazhar, H., Osswald, T., & Negrut, D. (2016). On the use of computational multi-body dynamics analysis in SLS-based 3D printing. Additive Manufacturing, 12, 291–295. https://doi.org/10.1016/j.addma.2016.05.012

Grooved feed single screw extruders?improving productivity and reducing viscous heating effects

Polymer Engineering & Science / Jul 01, 1998

Davis, B. A., Gramann, P. J., Noriega E., M. D. P., & Osswald, T. A. (1998). Grooved feed single screw extruders?improving productivity and reducing viscous heating effects. Polymer Engineering & Science, 38(7), 1199–1204. https://doi.org/10.1002/pen.10288

Process-Induced Fiber Orientation in Fused Filament Fabrication

Journal of Composites Science / Aug 02, 2018

Mulholland, T., Goris, S., Boxleitner, J., Osswald, T., & Rudolph, N. (2018). Process-Induced Fiber Orientation in Fused Filament Fabrication. Journal of Composites Science, 2(3), 45. https://doi.org/10.3390/jcs2030045

A boundary element analysis of flow in sheet molding compound

Polymer Composites / Apr 01, 1988

Barone, M. R., & Osswald, T. A. (1988). A boundary element analysis of flow in sheet molding compound. Polymer Composites, 9(2), 158–164. https://doi.org/10.1002/pc.750090210

Plastics Handbook

Dec 04, 2018

Baur, E., Osswald, T. A., & Rudolph, N. (2018). Plastics Handbook. https://doi.org/10.3139/9781569905609

Characterization of mechanical properties and fracture mode of PLA and copper/PLA composite part manufactured by fused deposition modeling

SN Applied Sciences / May 21, 2019

Zhang, X., Chen, L., Mulholland, T., & Osswald, T. A. (2019). Characterization of mechanical properties and fracture mode of PLA and copper/PLA composite part manufactured by fused deposition modeling. SN Applied Sciences, 1(6). https://doi.org/10.1007/s42452-019-0639-5

Flow Analysis in Screw Extruders-Effect of Kinematic Conditions

International Polymer Processing / Dec 01, 1998

Rauwendaal, C., Osswald, T. A., Tellez, G., & Gramann, P. J. (1998). Flow Analysis in Screw Extruders-Effect of Kinematic Conditions. International Polymer Processing, 13(4), 327–333. https://doi.org/10.3139/217.980327

Laser polishing of Cu/PLA composite parts fabricated by fused deposition modeling: Analysis of surface finish and mechanical properties

Polymer Composites / Apr 01, 2020

Chen, L., Zhang, X., Wang, Y., & Osswald, T. A. (2020). Laser polishing of Cu/PLA composite parts fabricated by fused deposition modeling: Analysis of surface finish and mechanical properties. Polymer Composites, 41(4), 1356–1368. Portico. https://doi.org/10.1002/pc.25459

A novel fiber length measurement technique for discontinuous fiber‐reinforced composites: A comparative study with existing methods

Polymer Composites / Jun 22, 2017

Goris, S., Back, T., Yanev, A., Brands, D., Drummer, D., & Osswald, T. A. (2017). A novel fiber length measurement technique for discontinuous fiber‐reinforced composites: A comparative study with existing methods. Polymer Composites, 39(11), 4058–4070. Portico. https://doi.org/10.1002/pc.24466

Failure criterion for PA12 SLS additive manufactured parts

Additive Manufacturing / May 01, 2018

Obst, P., Launhardt, M., Drummer, D., Osswald, P. V., & Osswald, T. A. (2018). Failure criterion for PA12 SLS additive manufactured parts. Additive Manufacturing, 21, 619–627. https://doi.org/10.1016/j.addma.2018.04.008

The History of Tomorrow's Materials: Protein-Based Biopolymers

Plastics Engineering / Feb 01, 2008

Ralston, B. E., & Osswald, T. A. (2008). The History of Tomorrow’s Materials: Protein-Based Biopolymers. Plastics Engineering, 64(2), 36–40. Portico. https://doi.org/10.1002/j.1941-9635.2008.tb00292.x

Polymer flow length simulation during injection mold filling

Polymer Engineering & Science / Mar 01, 1997

Buchmann, M., Theriault, R., & Osswald, T. A. (1997). Polymer flow length simulation during injection mold filling. Polymer Engineering & Science, 37(3), 667–671. https://doi.org/10.1002/pen.11710

The effects of e-beam irradiation induced cross linking on the friction and wear of polyamide 66 in sliding contact

Wear / Mar 01, 2010

Feulner, R., Brocka, Z., Seefried, A., Kobes, M. O., Hülder, G., & Osswald, T. A. (2010). The effects of e-beam irradiation induced cross linking on the friction and wear of polyamide 66 in sliding contact. Wear, 268(7–8), 905–910. https://doi.org/10.1016/j.wear.2009.12.025

Construction of Pedestrian Infrastructure along Transit Corridors

Mar 01, 2021

Braun, L., Barajas, J., Lee, B., Martin, R., Mashraky, R., Rathor, S., & Shrivastava, M. (2021). Construction of Pedestrian Infrastructure along Transit Corridors. https://doi.org/10.36501/0197-9191/21-004

Structure of Polymers

Materials Science of Polymers for Engineers / Sep 06, 2012

Osswald, T. A., & Menges, G. (2012). Structure of Polymers. Materials Science of Polymers for Engineers, 49–82. https://doi.org/10.3139/9781569905241.003

Failure and Damage of Polymers

Materials Science of Polymers for Engineers / Sep 06, 2012

Osswald, T. A., & Menges, G. (2012). Failure and Damage of Polymers. Materials Science of Polymers for Engineers, 423–487. https://doi.org/10.3139/9781569905241.010

Measuring fibre orientation in sisal fibre-reinforced, injection moulded polypropylene – Pros and cons of the experimental methods to validate injection moulding simulation

Composites Part A: Applied Science and Manufacturing / Apr 01, 2017

Albrecht, K., Baur, E., Endres, H.-J., Gente, R., Graupner, N., Koch, M., Neudecker, M., Osswald, T., Schmidtke, P., Wartzack, S., Webelhaus, K., & Müssig, J. (2017). Measuring fibre orientation in sisal fibre-reinforced, injection moulded polypropylene – Pros and cons of the experimental methods to validate injection moulding simulation. Composites Part A: Applied Science and Manufacturing, 95, 54–64. https://doi.org/10.1016/j.compositesa.2016.12.022

A Novel Cure Reaction Model Fitting Technique Based on DSC Scans

Journal of Polymer Engineering / Jan 01, 2005

Hernandez-Ortiz, J. P., & Osswald, T. A. (2005). A Novel Cure Reaction Model Fitting Technique Based on DSC Scans. Journal of Polymer Engineering, 25(1). https://doi.org/10.1515/polyeng.2005.25.1.23

Boundary integral equations for analyzing the flow of a chopped fiber reinforced polymer compound in compression molding

Journal of Non-Newtonian Fluid Mechanics / Jan 01, 1987

Barone, M. R., & Osswald, T. A. (1987). Boundary integral equations for analyzing the flow of a chopped fiber reinforced polymer compound in compression molding. Journal of Non-Newtonian Fluid Mechanics, 26(2), 185–206. https://doi.org/10.1016/0377-0257(87)80004-6

Electrical Properties of Polymers

Materials Science of Polymers for Engineers / Sep 06, 2012

Osswald, T. A., & Menges, G. (2012). Electrical Properties of Polymers. Materials Science of Polymers for Engineers, 489–511. https://doi.org/10.3139/9781569905241.011

Melt Rheology

Plastics Testing and Characterization / Mar 06, 2008

Naranjo, A., del Pilar Noriega E., M., Osswald, T. A., Roldán-Alzate, A., & Sierra, J. D. (2008). Melt Rheology. Plastics Testing and Characterization, 127–184. https://doi.org/10.3139/9783446418530.005

Comparative study of mixing in corotating twin screw extruders using computer simulation

Advances in Polymer Technology / Jan 01, 1998

Rios, A. C., Gramann, P. J., & Osswald, T. A. (1998). Comparative study of mixing in corotating twin screw extruders using computer simulation. Advances in Polymer Technology, 17(2), 107–113. https://doi.org/10.1002/(sici)1098-2329(199822)17:2<107::aid-adv2>3.0.co;2-x

Modeling processing of silicone rubber: Liquid versus hard silicone rubbers

Journal of Applied Polymer Science / Aug 24, 2010

Hernández-Ortiz, J. P., & Osswald, T. A. (2010). Modeling processing of silicone rubber: Liquid versus hard silicone rubbers. Journal of Applied Polymer Science, 119(3), 1864–1871. https://doi.org/10.1002/app.31995

Failure surface development for ABS fused filament fabrication parts

Additive Manufacturing / Aug 01, 2019

Mazzei Capote, G. A., Rudolph, N. M., Osswald, P. V., & Osswald, T. A. (2019). Failure surface development for ABS fused filament fabrication parts. Additive Manufacturing, 28, 169–175. https://doi.org/10.1016/j.addma.2019.05.005

Electrical, Optical, and Acoustic Properties

Plastics Testing and Characterization / Mar 06, 2008

Naranjo, A., del Pilar Noriega E., M., Osswald, T. A., Roldán-Alzate, A., & Sierra, J. D. (2008). Electrical, Optical, and Acoustic Properties. Plastics Testing and Characterization, 315–357. https://doi.org/10.3139/9783446418530.009

Processing induced residual stress in asymmetric laminate panels

Polymer Composites / Jun 01, 1999

Theriault, R. P., Osswald, T. A., & Castro, J. M. (1999). Processing induced residual stress in asymmetric laminate panels. Polymer Composites, 20(3), 493–509. https://doi.org/10.1002/pc.10373

Predicting shrinkage and warpage of fiber-reinforced composite parts

Polymer Composites / Aug 01, 1994

Tseng, S.-C., & Osswald, T. A. (1994). Predicting shrinkage and warpage of fiber-reinforced composite parts. Polymer Composites, 15(4), 270–277. https://doi.org/10.1002/pc.750150405

Numerical simulation of three-dimensional viscoelastic planar contraction flow using the software OpenFOAM

Computers & Chemical Engineering / Feb 01, 2012

Holmes, L., Favero, J., & Osswald, T. (2012). Numerical simulation of three-dimensional viscoelastic planar contraction flow using the software OpenFOAM. Computers &amp; Chemical Engineering, 37, 64–73. https://doi.org/10.1016/j.compchemeng.2011.09.015

Mechanism of fiber–matrix separation in ribbed compression molded parts

Polymer Composites / Jan 01, 2007

Londoño-Hurtado, A., Hernandez-Ortiz, J. P., & Osswald, T. A. (2007). Mechanism of fiber–matrix separation in ribbed compression molded parts. Polymer Composites, 28(4), 451–457. https://doi.org/10.1002/pc.20295

Discontinuous Fiber-Reinforced Composites

Discontinuous Fiber-Reinforced Composites / Mar 09, 2020

Gandhi, U. N., Goris, S., Osswald, T. A., & Song, Y.-Y. (2020). Discontinuous Fiber-Reinforced Composites. Discontinuous Fiber-Reinforced Composites, I–XIV. https://doi.org/10.3139/9781569906958.fm

Process-induced fiber matrix separation in long fiber-reinforced thermoplastics

Composites Part A: Applied Science and Manufacturing / Feb 01, 2018

Goris, S., & Osswald, T. A. (2018). Process-induced fiber matrix separation in long fiber-reinforced thermoplastics. Composites Part A: Applied Science and Manufacturing, 105, 321–333. https://doi.org/10.1016/j.compositesa.2017.11.024

Investigation of the influence of exposure time on the dual-curing reaction of RPU 70 during the DLS process and the resulting mechanical part properties

Additive Manufacturing / Mar 01, 2020

Obst, P., Riedelbauch, J., Oehlmann, P., Rietzel, D., Launhardt, M., Schmölzer, S., Osswald, T. A., & Witt, G. (2020). Investigation of the influence of exposure time on the dual-curing reaction of RPU 70 during the DLS process and the resulting mechanical part properties. Additive Manufacturing, 32, 101002. https://doi.org/10.1016/j.addma.2019.101002

Experimental and Numerical Analysis of Fiber Matrix Separation during Compression Molding of Long Fiber Reinforced Thermoplastics

Journal of Composites Science / May 16, 2017

Kuhn, C., Walter, I., Taeger, O., & Osswald, T. (2017). Experimental and Numerical Analysis of Fiber Matrix Separation during Compression Molding of Long Fiber Reinforced Thermoplastics. Journal of Composites Science, 1(1), 2. https://doi.org/10.3390/jcs1010002

Micro-injection molded, poly(vinyl alcohol)-calcium salt templates for precise customization of 3D hydrogel internal architecture

Acta Biomaterialia / Sep 01, 2019

McNulty, J. D., Marti-Figueroa, C., Seipel, F., Plantz, J. Z., Ellingham, T., Duddleston, L. J. L., Goris, S., Cox, B. L., Osswald, T. A., Turng, L.-S., & Ashton, R. S. (2019). Micro-injection molded, poly(vinyl alcohol)-calcium salt templates for precise customization of 3D hydrogel internal architecture. Acta Biomaterialia, 95, 258–268. https://doi.org/10.1016/j.actbio.2019.04.050

CAE method for compression molding of carbon fiber-reinforced thermoplastic composite using bulk materials

Composites Part A: Applied Science and Manufacturing / Nov 01, 2018

Song, Y., Gandhi, U., Sekito, T., Vaidya, U. K., Vallury, S., Yang, A., & Osswald, T. (2018). CAE method for compression molding of carbon fiber-reinforced thermoplastic composite using bulk materials. Composites Part A: Applied Science and Manufacturing, 114, 388–397. https://doi.org/10.1016/j.compositesa.2018.09.002

Simulative Prediction of Fiber-Matrix Separation in Rib Filling During Compression Molding Using a Direct Fiber Simulation

Journal of Composites Science / Dec 28, 2017

Kuhn, C., Walter, I., Täger, O., & Osswald, T. (2017). Simulative Prediction of Fiber-Matrix Separation in Rib Filling During Compression Molding Using a Direct Fiber Simulation. Journal of Composites Science, 2(1), 2. https://doi.org/10.3390/jcs2010002

Method for time-temperature-transformation diagrams using DSC data: Linseed aliphatic epoxy resin

Journal of Applied Polymer Science / Mar 10, 2014

Restrepo-Zapata, N. C., Osswald, T. A., & Hernández-Ortiz, J. P. (2014). Method for time-temperature-transformation diagrams using DSC data: Linseed aliphatic epoxy resin. Journal of Applied Polymer Science, 131(15), n/a-n/a. https://doi.org/10.1002/app.40566

Transcrystalline interphases in natural fiber-PP composites: effect of coupling agent

Composite Interfaces / Jan 01, 2000

Sanadi, A. R., & Caulfield, D. F. (2000). Transcrystalline interphases in natural fiber-PP composites: effect of coupling agent. Composite Interfaces, 7(1), 31–43. https://doi.org/10.1163/156855400300183560

Thermal curing kinetics optimization of epoxy resin in Digital Light Synthesis

Additive Manufacturing / Mar 01, 2020

Redmann, A., Oehlmann, P., Scheffler, T., Kagermeier, L., & Osswald, T. A. (2020). Thermal curing kinetics optimization of epoxy resin in Digital Light Synthesis. Additive Manufacturing, 32, 101018. https://doi.org/10.1016/j.addma.2019.101018

A strength tensor based failure criterion with stress interactions

Polymer Composites / Jan 05, 2017

Osswald, P. V., & Osswald, T. A. (2017). A strength tensor based failure criterion with stress interactions. Polymer Composites, 39(8), 2826–2834. Portico. https://doi.org/10.1002/pc.24275

Influence of Pressure on Volume, Temperature and Crystallization of Thermoplastics during Polymer Processing

International Polymer Processing / Jul 01, 2011

Rudolph, N. M., Osswald, T. A., & Ehrenstein, G. W. (2011). Influence of Pressure on Volume, Temperature and Crystallization of Thermoplastics during Polymer Processing. International Polymer Processing, 26(3), 239–248. https://doi.org/10.3139/217.2417

Simulating Polymer Mixing Processes Using the Boundary Element Method

International Polymer Processing / Dec 01, 1992

Gramann, P. J., & Osswald, T. A. (1992). Simulating Polymer Mixing Processes Using the Boundary Element Method. International Polymer Processing, 7(4), 303–313. https://doi.org/10.3139/217.920303

Fabrication of hybrid composite T-joints by co-curing with 3D printed dual cure epoxy

Composites Part B: Engineering / Feb 01, 2020

Dahmen, V., Redmann, A. J., Austermann, J., Quintanilla, A. L., Mecham, S. J., & Osswald, T. A. (2020). Fabrication of hybrid composite T-joints by co-curing with 3D printed dual cure epoxy. Composites Part B: Engineering, 183, 107728. https://doi.org/10.1016/j.compositesb.2019.107728

Surface roughness of polyamide 12 parts manufactured using selective laser sintering

Polymer Testing / Dec 01, 2019

Petzold, S., Klett, J., Schauer, A., & Osswald, T. A. (2019). Surface roughness of polyamide 12 parts manufactured using selective laser sintering. Polymer Testing, 80, 106094. https://doi.org/10.1016/j.polymertesting.2019.106094

Plastics Handbook

Plastics Handbook / Dec 04, 2018

Baur, E., Osswald, T. A., & Rudolph, N. (2018). Plastics Handbook. Plastics Handbook, I–XXI. https://doi.org/10.3139/9781569905609.fm

Method to account for the fiber orientation of the initial charge on the fiber orientation of finished part in compression molding simulation

Composites Part A: Applied Science and Manufacturing / Sep 01, 2017

Song, Y., Gandhi, U., Pérez, C., Osswald, T., Vallury, S., & Yang, A. (2017). Method to account for the fiber orientation of the initial charge on the fiber orientation of finished part in compression molding simulation. Composites Part A: Applied Science and Manufacturing, 100, 244–254. https://doi.org/10.1016/j.compositesa.2017.05.021

Modeling Polymer Processes

Understanding Polymer Processing / Oct 01, 2010

Osswald, T. A. (2010). Modeling Polymer Processes. Understanding Polymer Processing, 207–279. https://doi.org/10.3139/9783446446038.009

1997 IEEE Annual Textile, Fiber and Film Industry Technical Conference

1997 IEEE Annual Textile, Fiber and Film Industry Technical Conference / Jan 01, 1997

1997 IEEE Annual Textile, Fiber and Film Industry Technical Conference. (1997). 1997 IEEE Annual Textile, Fiber and Film Industry Technical Conference. https://doi.org/10.1109/texcon.1997.598523

Inhalt

HTM Journal of Heat Treatment and Materials / Dec 01, 1994

Inhalt. (1994). HTM Journal of Heat Treatment and Materials, 49(6), 361–361. https://doi.org/10.1515/htm-1994-490601

A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites – Part II

Composites Part A: Applied Science and Manufacturing / May 01, 2017

Ropers, S., Sachs, U., Kardos, M., & Osswald, T. A. (2017). A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites – Part II. Composites Part A: Applied Science and Manufacturing, 96, 67–76. https://doi.org/10.1016/j.compositesa.2017.02.007

Highly filled polymers for power passives packaging

2008 2nd Electronics Systemintegration Technology Conference / Sep 01, 2008

Egelkraut, S., Heinle, C., Eckardt, B., Kramer, P., Brocka, Z., Marz, M., Ryssel, H., & Ehrenstein, G. W. (2008). Highly filled polymers for power passives packaging. 2008 2nd Electronics Systemintegration Technology Conference. https://doi.org/10.1109/estc.2008.4684382

Experimental and Numerical Study of Rhomboidal Mixing Sections

International Polymer Processing / Mar 01, 2000

Rios, A. C., Gramann, P. J., Osswald, T. A., Noriega, M. del P., & Estrada, O. A. (2000). Experimental and Numerical Study of Rhomboidal Mixing Sections. International Polymer Processing, 15(1), 12–19. https://doi.org/10.3139/217.1578

The effect of micromechanics models on mechanical property predictions for short fiber composites

Composite Structures / Jul 01, 2020

Zhao, J., Su, D.-X., Yi, J., Cheng, G., Turng, L.-S., & Osswald, T. (2020). The effect of micromechanics models on mechanical property predictions for short fiber composites. Composite Structures, 244, 112229. https://doi.org/10.1016/j.compstruct.2020.112229

Nozzle flow behavior of aluminum/polycarbonate composites in the material extrusion printing process

Journal of Applied Polymer Science / Nov 11, 2018

Zhang, X., Chen, L., Kowalski, C., Mulholland, T., & Osswald, T. A. (2018). Nozzle flow behavior of aluminum/polycarbonate composites in the material extrusion printing process. Journal of Applied Polymer Science, 136(12), 47252. Portico. https://doi.org/10.1002/app.47252

Vulcanization of EPDM rubber compounds with and without blowing agents: Identification of reaction events and TTT-diagram using DSC data

Polymer Engineering & Science / Dec 17, 2014

Restrepo-Zapata, N. C., Osswald, T. A., & Hernández-Ortiz, J. P. (2014). Vulcanization of EPDM rubber compounds with and without blowing agents: Identification of reaction events and TTT-diagram using DSC data. Polymer Engineering &amp; Science, 55(9), 2073–2088. https://doi.org/10.1002/pen.24049

Modeling the behavior of fiber suspensions in the molding of polymer composites

Journal of Reinforced Plastics and Composites / May 01, 2011

Londoño-Hurtado, A., Osswald, T. A., & Hernandez-Ortíz, J. P. (2011). Modeling the behavior of fiber suspensions in the molding of polymer composites. Journal of Reinforced Plastics and Composites, 30(9), 781–790. https://doi.org/10.1177/0731684411400227

IN LINE MEASUREMENT OF THE POLYMER MELTING BEHAVIOR IN SINGLE SCREW EXTRUDERS

Journal of Polymer Engineering / Nov 01, 2004

Noriega, M. del P., Osswald, T. A., & Ferrier, N. (2004). IN LINE MEASUREMENT OF THE POLYMER MELTING BEHAVIOR IN SINGLE SCREW EXTRUDERS. Journal of Polymer Engineering, 24(6). https://doi.org/10.1515/polyeng.2004.24.6.557

A Finite Element Analysis of the Thermomechanical Behavior of Fiber Reinforced Composites

Journal of Thermoplastic Composite Materials / Apr 01, 1991

Osswald, T. A. (1991). A Finite Element Analysis of the Thermomechanical Behavior of Fiber Reinforced Composites. Journal of Thermoplastic Composite Materials, 4(2), 173–189. https://doi.org/10.1177/089270579100400204

Expanding plastics recycling technologies: chemical aspects, technology status and challenges

Green Chemistry / Jan 01, 2022

Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., Curley, J. B., Curtzwiler, G. W., Dong, S., Gaddameedi, S., García, J. E., Hermans, I., Kim, M. S., Ma, J., Mark, L. O., … Huber, G. W. (2022). Expanding plastics recycling technologies: chemical aspects, technology status and challenges. Green Chemistry, 24(23), 8899–9002. https://doi.org/10.1039/d2gc02588d

Degree of cure of epoxy/acrylic photopolymers: Characterization with raman spectroscopy and a modified phenomenological model

Polymer Engineering & Science / Mar 27, 2017

Martin, B., Puentes, J., Wruck, L., & Osswald, T. A. (2017). Degree of cure of epoxy/acrylic photopolymers: Characterization with raman spectroscopy and a modified phenomenological model. Polymer Engineering &amp; Science, 58(2), 228–237. Portico. https://doi.org/10.1002/pen.24550

SIMULANDO LA INYECCIÓN DE PLÁSTICOS. NUEVAS FORMAS DE APRENDER LOS PROCESOS.

DYNA INGENIERIA E INDUSTRIA / Jan 01, 2012

MARTINEZ MUNETA, M. L., JUANES MÁRQUEZ, J. D., RODRIGUEZ VILLAGRÁ, M., & PEREZ GARCIA, J. M. (2012). SIMULANDO LA INYECCIÓN DE PLÁSTICOS. NUEVAS FORMAS DE APRENDER LOS PROCESOS. DYNA INGENIERIA E INDUSTRIA, 87(3), 671–678. https://doi.org/10.6036/4709

Fiber Orientation Effects in Fused Filament Fabrication of Air-Cooled Heat Exchangers

JOM / Jan 16, 2018

Mulholland, T., Goris, S., Boxleitner, J., Osswald, T. A., & Rudolph, N. (2018). Fiber Orientation Effects in Fused Filament Fabrication of Air-Cooled Heat Exchangers. JOM, 70(3), 298–302. https://doi.org/10.1007/s11837-017-2733-8

Angular upsampling of projection measurements in 3D computed tomography using a sparsity prior

2015 IEEE International Conference on Image Processing (ICIP) / Sep 01, 2015

Karimi, D., Ward, R., & Ford, N. (2015). Angular upsampling of projection measurements in 3D computed tomography using a sparsity prior. 2015 IEEE International Conference on Image Processing (ICIP). https://doi.org/10.1109/icip.2015.7351427

Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering

Physics Procedia / Jan 01, 2010

Drummer, D., Rietzel, D., & Kühnlein, F. (2010). Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering. Physics Procedia, 5, 533–542. https://doi.org/10.1016/j.phpro.2010.08.081

An integrated model for statistical and vision monitoring in manufacturing transitions

Quality and Reliability Engineering International / Jan 01, 2003

Nembhard, H. B., Ferrier, N. J., Osswald, T. A., & Sanz-Uribe, J. R. (2003). An integrated model for statistical and vision monitoring in manufacturing transitions. Quality and Reliability Engineering International, 19(6), 461–476. https://doi.org/10.1002/qre.517

Generalized Newtonian Fluid (GNF) Models

Polymer Rheology / Nov 06, 2014

Osswald, T., & Rudolph, N. (2014). Generalized Newtonian Fluid (GNF) Models. Polymer Rheology, 59–99. https://doi.org/10.3139/9781569905234.003

Analysis of fiber damage mechanisms during processing of reinforced polymer melts

Engineering Analysis with Boundary Elements / Jul 01, 2002

Hernandez, J. P., Raush, T., Rios, A., Strauss, S., & Osswald, T. A. (2002). Analysis of fiber damage mechanisms during processing of reinforced polymer melts. Engineering Analysis with Boundary Elements, 26(7), 621–628. https://doi.org/10.1016/s0955-7997(02)00018-8

Fibre Length Reduction in Natural Fibre-Reinforced Polymers during Compounding and Injection Moulding—Experiments Versus Numerical Prediction of Fibre Breakage

Journal of Composites Science / Mar 28, 2018

Albrecht, K., Osswald, T., Baur, E., Meier, T., Wartzack, S., & Müssig, J. (2018). Fibre Length Reduction in Natural Fibre-Reinforced Polymers during Compounding and Injection Moulding—Experiments Versus Numerical Prediction of Fibre Breakage. Journal of Composites Science, 2(2), 20. https://doi.org/10.3390/jcs2020020

Technical Development of Multi-Resin Three-Dimensional Printer Using Bottom-Up Method

International Journal of Automation and Smart Technology / Dec 01, 2018

Jiang, C.-P. (2018). Technical Development of Multi-Resin Three-Dimensional Printer Using Bottom-Up Method. International Journal of Automation and Smart Technology, 8(4), 173–178. https://doi.org/10.5875/ausmt.v8i4.1840

Mechanical Response of Fiber-Filled Automotive Body Panels Manufactured with the Ku-FizzTM Microcellular Injection Molding Process

Polymers / Nov 14, 2022

Simon, S. A., Hain, J., Sracic, M. W., Tewani, H. R., Prabhakar, P., & Osswald, T. A. (2022). Mechanical Response of Fiber-Filled Automotive Body Panels Manufactured with the Ku-FizzTM Microcellular Injection Molding Process. Polymers, 14(22), 4916. https://doi.org/10.3390/polym14224916

Manufacturing of a PET Filament from Recycled Material for Material Extrusion (MEX)

Recycling / Sep 20, 2022

Bustos Seibert, M., Mazzei Capote, G. A., Gruber, M., Volk, W., & Osswald, T. A. (2022). Manufacturing of a PET Filament from Recycled Material for Material Extrusion (MEX). Recycling, 7(5), 69. https://doi.org/10.3390/recycling7050069

Polymer composites: Additive manufacturing of composites

Polymer Composites / May 04, 2022

Osswald, T. A., Jack, D., & Thompson, M. S. (2022). Polymer composites: Additive manufacturing of composites. Polymer Composites, 43(6), 3496–3497. Portico. https://doi.org/10.1002/pc.26631

Natural Rubber Blend Optimization via Data-Driven Modeling: The Implementation for Reverse Engineering

Polymers / May 31, 2022

Román, A. J., Qin, S., Rodríguez, J. C., González, L. D., Zavala, V. M., & Osswald, T. A. (2022). Natural Rubber Blend Optimization via Data-Driven Modeling: The Implementation for Reverse Engineering. Polymers, 14(11), 2262. https://doi.org/10.3390/polym14112262

Underwater ultrasonic topological waveguides by metal additive manufacturing

Applied Physics Letters / Apr 04, 2022

Wang, M. Y., Thevamaran, M., Mattei, M. S., Hacha, B. G., Mazzei Capote, G. A., Yu, Z., Osswald, T., Goldsmith, R. H., Thoma, D. J., & Ma, C. (2022). Underwater ultrasonic topological waveguides by metal additive manufacturing. Applied Physics Letters, 120(14), 141702. https://doi.org/10.1063/5.0086951

Compounding a High-Permittivity Thermoplastic Material and Its Applicability in Manufacturing of Microwave Photonic Crystals

Materials / Mar 28, 2022

Mazzei Capote, G. A., Montoya-Ospina, M. C., Liu, Z., Mattei, M. S., Liu, B., Delgado, A. P., Yu, Z., Goldsmith, R. H., & Osswald, T. A. (2022). Compounding a High-Permittivity Thermoplastic Material and Its Applicability in Manufacturing of Microwave Photonic Crystals. Materials, 15(7), 2492. https://doi.org/10.3390/ma15072492

Targeted Temperature Manipulation and Analysis of the Influence on Mechanical Properties in Large-Scale Extrusion Additive Manufacturing

Applied Sciences / Mar 15, 2022

Tagscherer, N., Osswald, T. A., & Drechsler, K. (2022). Targeted Temperature Manipulation and Analysis of the Influence on Mechanical Properties in Large-Scale Extrusion Additive Manufacturing. Applied Sciences, 12(6), 2998. https://doi.org/10.3390/app12062998

Melt Conveying in Single-Screw Extruders: Modeling and Simulation

Polymers / Feb 23, 2022

Marschik, C., Roland, W., & Osswald, T. A. (2022). Melt Conveying in Single-Screw Extruders: Modeling and Simulation. Polymers, 14(5), 875. https://doi.org/10.3390/polym14050875

Experimental Investigation of In-Plane Shear Behaviour of Thermoplastic Fibre-Reinforced Composites under Thermoforming Process Conditions

Journal of Composites Science / Sep 15, 2021

Pyatov, N., Natarajan, H. K., & Osswald, T. A. (2021). Experimental Investigation of In-Plane Shear Behaviour of Thermoplastic Fibre-Reinforced Composites under Thermoforming Process Conditions. Journal of Composites Science, 5(9), 248. https://doi.org/10.3390/jcs5090248

High-force dynamic mechanical analysis of composite sandwich panels for aerospace structures

Composites Part C: Open Access / Jul 01, 2021

Redmann, A., Montoya-Ospina, M. C., Karl, R., Rudolph, N., & Osswald, T. A. (2021). High-force dynamic mechanical analysis of composite sandwich panels for aerospace structures. Composites Part C: Open Access, 5, 100136. https://doi.org/10.1016/j.jcomc.2021.100136

Novel modeling approach for fiber breakage during molding of long fiber-reinforced thermoplastics

Physics of Fluids / Jul 01, 2021

Bechara, A., Goris, S., Yanev, A., Brands, D., & Osswald, T. (2021). Novel modeling approach for fiber breakage during molding of long fiber-reinforced thermoplastics. Physics of Fluids, 33(7), 073318. https://doi.org/10.1063/5.0058693

Data enriched lubrication force modeling for a mechanistic fiber simulation of short fiber-reinforced thermoplastics

Physics of Fluids / May 01, 2021

Kugler, S. K., Bechara, A., Perez, H., Cruz, C., Kech, A., & Osswald, T. A. (2021). Data enriched lubrication force modeling for a mechanistic fiber simulation of short fiber-reinforced thermoplastics. Physics of Fluids, 33(5), 053107. https://doi.org/10.1063/5.0049641

Editorial for the Special Issue on Discontinuous Fiber Composites, Volume II

Journal of Composites Science / Mar 05, 2021

Kuhn, C., & Osswald, T. A. (2021). Editorial for the Special Issue on Discontinuous Fiber Composites, Volume II. Journal of Composites Science, 5(3), 71. https://doi.org/10.3390/jcs5030071

Evaluation of Single-Lap and Block Shear Test Methods in Adhesively Bonded Composite Joints

Journal of Composites Science / Jan 15, 2021

Redmann, A., Damodaran, V., Tischer, F., Prabhakar, P., & Osswald, T. A. (2021). Evaluation of Single-Lap and Block Shear Test Methods in Adhesively Bonded Composite Joints. Journal of Composites Science, 5(1), 27. https://doi.org/10.3390/jcs5010027

Comparative Analysis of the Impact of Additively Manufactured Polymer Tools on the Fiber Configuration of Injection Molded Long-Fiber-Reinforced Thermoplastics

Journal of Composites Science / Sep 15, 2020

Knorr, L., Setter, R., Rietzel, D., Wudy, K., & Osswald, T. (2020). Comparative Analysis of the Impact of Additively Manufactured Polymer Tools on the Fiber Configuration of Injection Molded Long-Fiber-Reinforced Thermoplastics. Journal of Composites Science, 4(3), 136. https://doi.org/10.3390/jcs4030136

Validation of Fiber Breakage in Simple Shear Flow with Direct Fiber Simulation

Journal of Composites Science / Sep 10, 2020

Chang, T.-C., Bechara Senior, A., Celik, H., Brands, D., Yanev, A., & Osswald, T. (2020). Validation of Fiber Breakage in Simple Shear Flow with Direct Fiber Simulation. Journal of Composites Science, 4(3), 134. https://doi.org/10.3390/jcs4030134

Significance of Model Parameter Variations in the pARD-RSC Model

Journal of Composites Science / Aug 07, 2020

Kech, A., Kugler, S., & Osswald, T. (2020). Significance of Model Parameter Variations in the pARD-RSC Model. Journal of Composites Science, 4(3), 109. https://doi.org/10.3390/jcs4030109

Measuring Fiber Length in the Core and Shell Regions of Injection Molded Long Fiber-Reinforced Thermoplastic Plaques

Journal of Composites Science / Jul 31, 2020

Senior, A. B., & Osswald, T. (2020). Measuring Fiber Length in the Core and Shell Regions of Injection Molded Long Fiber-Reinforced Thermoplastic Plaques. Journal of Composites Science, 4(3), 104. https://doi.org/10.3390/jcs4030104

A Flow-Dependent Fiber Orientation Model

Journal of Composites Science / Jul 22, 2020

Kugler, S. K., Dey, A. P., Saad, S., Cruz, C., Kech, A., & Osswald, T. (2020). A Flow-Dependent Fiber Orientation Model. Journal of Composites Science, 4(3), 96. https://doi.org/10.3390/jcs4030096

Macroscopic fiber orientation model evaluation for concentrated short fiber reinforced polymers in comparison to experimental data

Polymer Composites / Mar 10, 2020

Kugler, S. K., Lambert, G. M., Cruz, C., Kech, A., Osswald, T. A., & Baird, D. G. (2020). Macroscopic fiber orientation model evaluation for concentrated short fiber reinforced polymers in comparison to experimental data. Polymer Composites, 41(7), 2542–2556. Portico. https://doi.org/10.1002/pc.25553

Fiber Orientation Predictions—A Review of Existing Models

Journal of Composites Science / Jun 08, 2020

Kugler, S. K., Kech, A., Cruz, C., & Osswald, T. (2020). Fiber Orientation Predictions—A Review of Existing Models. Journal of Composites Science, 4(2), 69. https://doi.org/10.3390/jcs4020069

Experimental Validation of a Direct Fiber Model for Orientation Prediction

Journal of Composites Science / May 25, 2020

Simon, S. A., Bechara Senior, A., & Osswald, T. (2020). Experimental Validation of a Direct Fiber Model for Orientation Prediction. Journal of Composites Science, 4(2), 59. https://doi.org/10.3390/jcs4020059

Experimental study of particle migration in polymer processing

Polymer Composites / Oct 17, 2018

Colón Quintana, J. L., Heckner, T., Chrupala, A., Pollock, J., Goris, S., & Osswald, T. (2018). Experimental study of particle migration in polymer processing. Polymer Composites, 40(6), 2165–2177. Portico. https://doi.org/10.1002/pc.25018

Fiber-Reinforced Composite Sandwich Structures by Co-Curing with Additive Manufactured Epoxy Lattices

Journal of Composites Science / May 16, 2019

Austermann, J., Redmann, A. J., Dahmen, V., Quintanilla, A. L., Mecham, S. J., & Osswald, T. A. (2019). Fiber-Reinforced Composite Sandwich Structures by Co-Curing with Additive Manufactured Epoxy Lattices. Journal of Composites Science, 3(2), 53. https://doi.org/10.3390/jcs3020053

Validating a Failure Surface Developed for ABS Fused Filament Fabrication Parts through Complex Loading Experiments

Journal of Composites Science / May 10, 2019

Mazzei Capote, G. A., Redmann, A., & Osswald, T. A. (2019). Validating a Failure Surface Developed for ABS Fused Filament Fabrication Parts through Complex Loading Experiments. Journal of Composites Science, 3(2), 49. https://doi.org/10.3390/jcs3020049

Editorial for the Special Issue on Discontinuous Fiber Composites

Journal of Composites Science / Oct 23, 2018

Osswald, T. (2018). Editorial for the Special Issue on Discontinuous Fiber Composites. Journal of Composites Science, 2(4), 63. https://doi.org/10.3390/jcs2040063

Prediction of vortex height from mechanical mixing in metal matrix nanocomposite processing by means of dimensional analysis and scaling

Journal of Manufacturing Processes / Apr 01, 2014

García-Rodríguez, S., Puentes, J., Li, X. C., & Osswald, T. A. (2014). Prediction of vortex height from mechanical mixing in metal matrix nanocomposite processing by means of dimensional analysis and scaling. Journal of Manufacturing Processes, 16(2), 212–217. https://doi.org/10.1016/j.jmapro.2013.12.001

Education

University of Illinois at Urbana-Champaign

PhD, Mechanical Engineering / January, 1987

Urbana, Illinois, United States of America

South Dakota School of Mines and Technology

M.S., Mechanical Engineering / May, 1982

Rapid City, South Dakota, United States of America

South Dakota School of Mines and Technology

B.S., Mechanical Engineering / May, 1981

Rapid City, South Dakota, United States of America

Experience

University of Wisconsin Madison

Professor / August, 1989Present

Rheinisch Westfalische Technische Hochschule Aachen

Humboldt Fellow / February, 1987June, 1989

Links & Social Media

Join Tim on NotedSource!
Join Now

At NotedSource, we believe that professors, post-docs, scientists and other researchers have deep, untapped knowledge and expertise that can be leveraged to drive innovation within companies. NotedSource is committed to bridging the gap between academia and industry by providing a platform for collaboration with industry and networking with other researchers.

For industry, NotedSource identifies the right academic experts in 24 hours to help organizations build and grow. With a platform of thousands of knowledgeable PhDs, scientists, and industry experts, NotedSource makes connecting and collaborating easy.

For academic researchers such as professors, post-docs, and Ph.D.s, NotedSource provides tools to discover and connect to your colleagues with messaging and news feeds, in addition to the opportunity to be paid for your collaboration with vetted partners.

Expert Institutions
NotedSource has experts from Stanford University
Expert institutions using NotedSource include Oxfort University
Experts from McGill have used NotedSource to share their expertise
University of Chicago experts have used NotedSource
MIT researchers have used NotedSource
Proudly trusted by
Microsoft uses NotedSource for academic partnerships
Johnson & Johnson academic research projects on NotedSource
ProQuest (Clarivate) uses NotedSource as their industry academia platform
Slamom consulting engages academics for research collaboration on NotedSource
Omnicom and OMG find academics on notedsource
Unilever research project have used NotedSource to engage academic experts